-- 作者：yc
-- 时间：2009/10/2 9:51:02
-- wilcom2006(威尔克姆2006) SP4的改进功能
改善针经理装载和运行速度
此前,两个问题是有经验的速度与针经理：加载时间的软件,发送设计机器.与ES2006 SP4时,加载和运行速度已显着改善.
Previously, the 'Use Saved Version' option didn’t work correctly when using user-refined letters with converted TrueType fonts. If the checkbox of 'Use Saved Version' was ticked, the user-refined letter was not applied, while if the checkbox was not ticked, the user-refined letter was applied. This problem has been rectified in ES2006 SP4.
改进的用户,完善字母转换TrueType字体
此前,'使用储存的版本'选项没有*吨正常使用时用户与成品字母转换 TrueType字体.如果选中的'使用储存的版本,是价格,用户完善信不适用,而如果复选框没有打勾,用户完善信适用
Previously, selecting and reshaping nodes on objects with a image beneath caused a reshape error. This problem has been rectified in ES2006 SP4.
改进的速度在增加亮片和/或改变片颜色
此前,增加片和/或改变颜色的金片亮片调色板太慢
Previously, ES tended to freeze at regular intervals when set to Japanese locale. This problem has been rectified in ES2006 SP4.
日本西冻结问题纠正
此前,胚胎往往冻结时,定期为日本地区
Previously, selecting and reshaping nodes on objects with a image beneath caused a reshape error. This problem has been rectified in ES2006 SP4.
改进的对象选择和改变
此前,选择和改变节点上的物体的形象造成了意想不到的下方错误
Previously, letters used when the lettering template was saved appeared on the screen when left-clicking the lettering tool and clicking the screen in a new designer window. This problem has been rectified in ES2006 SP4.
Affected templates should be resaved once the SP4 is installed.
刻字模板问题的纠正
此前,信件时使用的字体保存模板出现在屏幕上时,左点击文字工具,然后点击屏幕在一个新的设计器窗口.此问题已得到纠正在ES2006 SP4的受影响的模板应该resaved一旦安装SP4
Previously, edited Input C lines in reshaping mode disappeared when zooming in /out. They would reappear only after pressing Enter to accept changes. The problem didn’t occur with any other input methods – Complex Fill, Run, etc. The problem has been rectified in ES2006 SP4.
输入C改造模式问题纠正
此前,编辑输入C线改造模式消失时,缩放/退出.他们将再次出现只有在按Enter键接受变更.这个问题没有*吨发生任何其他输入方法每情结填补,运行等问题已得到纠正
Previously, applying Front-Back Shaping operations to certain overlapping Sequin Run and Input A objects after applying other shaping operations caused the Color-Object List to cease functioning properly – e.g. missing objects, additional objects appearing, unable to scroll down, etc. This problem has been rectified in ES2006 SP4.
彩色对象名单后,前后整形问题纠正
此前,采用前后形成一定的重叠业务运行和亮片输入一个物体后,申请其他塑造行动造成彩色对象名单停止运作正常每例如缺少的对象,更多的物体出现,无法向下滚动,
Previously, there were sometimes problems with Photo Flash generating stitches correctly. These have been rectified in ES2006 SP4.
相机闪光灯缝代问题纠正
此前,有问题,有时相机闪光灯产生缝正确
Previously, color changes disappeared upon re-sizing selected objects after selecting all and then deselecting – i.e. by holding down the Ctrl key and left-clicking the lettering to be deselected. Color changes only become available when stitches are re-generated. If the first object is not lettering, the problem doesn't occur. This has been rectified in ES2006 SP4.
刻字物体颜色变化问题的纠正
此前,颜色变化消失后重新上浆后,所选对象,然后选择所有取消每即按住Ctrl键和左边的点击刻字被取消.颜色变化不仅成为时,可用针重新生成.如果第一个对象是没有刻字,没有发生问题
With previous releases, customers have reported that ES crashes while using the Color-Object list while editing.
This has been rectified in ES2006 SP4.
彩色对象名单崩溃问题纠正
与以前的版本中,客户报告说,胚胎干崩溃而使用彩色对象名单,同时编辑
泰国字体转换
泰语面临的挑战提供了独特的自动字体转换.文字,写从左至右,由44个辅音,33个元音,4音调和其他符号.阿辅音的位置为中心的文字和元音的位置顶端/底部或右/左的辅音.元音的表示组合15元音和辅音字母.在以前的版本,辅音字母和元音字母和符号位于中线转换,形成良好的字样.然而,辅音和声调符号没有中心线不能转换
提高设计工作流与ES2006 SP4中,有一些改进了设计工作.这些措施包括：
？提高速度时,载入中搜索对话框.
？提高速度时,点击客户领域的设计和设计要求属性对话框.
？改善业绩的启动时不进行排序到位.
？在客户选择对话框A和更多*按钮已加入的底部时,客户名单有200多个客户在系统中.单击此负载下一个200个客户名单.
？现在所有的名单中逐页每即与更多*按钮出现底部的清单,如果人数项目超过200个.
? Improved speed when loading the Search dialog.
? Improved speed when clicking on the Customer field in Design and Design Request Properties dialogs.
? Improved performance on start-up when no sorting is in place.
? In the Customer Selection dialog a ‘More’ button has been added to the bottom of the customers list when
there are more than 200 customers in the system. Clicking this loads the next 200 customers to the list.
? All lists are now loaded page-by-page – i.e. the ‘More’ button appears at the bottom of a list if the number of
items exceeds 200.
|
|